Contact UsGet started
© 2025 Direct Cursus Technology L.L.C.

Deploying a gRPC service based on a Docker image

Written by
Updated at August 21, 2025

In this tutorial, you will deploy a gRPC echo service based on a Docker image. The service provides metrics in Prometheus text format and runs on port 9875.

To deploy the service based on a gRPC node:

  1. Set up your infrastructure.
  2. Prepare a Docker image for the service deployment.
  3. Deploy the service in DataSphere.
  4. Run a health check for the service you deployed.

If you no longer need the resources you created, delete them.

Getting started

Before getting started, register in Yandex Cloud, set up a community, and link your billing account to it.

  1. On the DataSphere home page, click Try for free and select an account to log in with: Yandex ID or your working account with the identity federation (SSO).
  2. Select the Yandex Identity Hub organization you are going to use in Yandex Cloud.
  3. Create a community.
  4. Link your billing account to the DataSphere community you are going to work in. Make sure you have a linked billing account and its status is ACTIVE or TRIAL_ACTIVE. If you do not have a billing account yet, create one in the DataSphere interface.

The cost of deploying a service based on a Docker image includes:

  • Fee for continuously running node instances (see DataSphere pricing).
  • Fee for running code cells for health checks of the deployed service.
  • Amount of storage used by Yandex Container Registry data (see Container Registry pricing).

Set up your infrastructure

Log in to the Yandex Cloud management console and select the organization you use to access DataSphere. On the Yandex Cloud Billing page, make sure you have a billing account linked.

If you have an active billing account, you can go to the cloud page to create or select a folder to run your infrastructure.

Note

If you are using an identity federation to work with Yandex Cloud, you might not have access to billing details. In this case, contact your Yandex Cloud organization administrator.

Create a folder

Note

In our example, both the Yandex Cloud infrastructure and the deployed service operate from the same Yandex Cloud folder; however, this is not a requirement.

  1. In the management console, select a cloud and click Create folder.
  2. Name your folder, e.g., data-folder.
  3. Click Create.

Create a registry in Container Registry

DataSphere can create a node from a Docker image hosted in Yandex Container Registry. To push an image, create a registry.

  1. Navigate to data-folder.
  2. In the list of services, select Container Registry.
  3. Click Create registry.
  4. Specify a name for the registry, e.g., datasphere-registry, and click Create registry.

Create a service account for the DataSphere project

  1. Navigate to data-folder.

  2. In the list of services, select Identity and Access Management.

  3. Click Create service account.

  4. Name the service account, e.g., sa-for-datasphere.

  5. Click Add role and assign the following roles to the service account:

    • container-registry.images.puller to allow DataSphere to pull your Docker image to create a node.
    • vpc.user to use the DataSphere network.
    • datasphere.user to send requests to the node.

  6. Click Create.

Create an authorized key for your service account

To allow your service account to get authenticated in Yandex Container Registry, create an authorized key.

Note

Authorized keys do not expire, but you can always get new authorized keys and get authenticated again if something goes wrong.

  1. Navigate to data-folder.

  2. In the list of services, select Identity and Access Management.

  3. In the left-hand panel, select Service accounts.

  4. In the list that opens, select the sa-for-datasphere service account.

  5. Click Create new key in the top panel.

  6. Select Create authorized key.

  7. Select the encryption algorithm.

  8. Save both the public and private keys. The private key is not saved in Yandex Cloud, and you will not be able to view the public key in the management console.

    Tip

    You can save the file with the key on your computer. You will need its contents later when creating a secret to access DataSphere in Container Registry.

Prepare your Docker image for the service deployment

If you do not have Docker yet, install it.

Create a Docker image

  1. Create a folder to store the Docker image configuration and all the required files, e.g., /home/docker-images.

  2. Clone the repository on GitHub and place the files in the folder you created.

  3. Run Docker Desktop.

  4. In the command shell, navigate to the folder with Dockerfile you created.

    cd docker-images

  5. Build the Docker image:

    docker build --platform linux/amd64 -t grpc-docker .

Push the Docker image to Container Registry

If you do not have the Yandex Cloud CLI installed yet, install and initialize it.

  1. Set data-folder as your default folder:

    yc config set folder-id <folder_ID>

  2. Get authenticated in Container Registry.

    1. Issue an IAM token for your service account:
    yc iam create-token

    The response will contain the IAM token. If you are authenticating using a federated account, the CLI will redirect you to the management console to authenticate and then send you an IAM token.

    Note

    The IAM token has a short lifetime: no more than 12 hours. This makes it a good method for applications that automatically request an IAM token.

    1. Run the command with the token value you got in the previous step in place of <IAM_token>:
    docker login \
  --username iam \
  --password <IAM_token> \
  cr.yandex

  3. Get a list of registries in data-folder:

    yc container registry list

    You will need the registry ID at the next step. Here is an example of the command output:

    +----------------------+---------------------+----------------------+
|          ID          |        NAME         |      FOLDER ID       |
+----------------------+---------------------+----------------------+
| crp86bmgl1da******** | datasphere-registry | b1g4bh24c406******** |
+----------------------+---------------------+----------------------+

  4. Push the Docker image to Container Registry by substituting your datasphere-registry ID:

    docker tag grpc-docker cr.yandex/<registry_ID>/grpc:v1
docker push cr.yandex/<registry_ID>/grpc:v1

Deploy the service in DataSphere

  1. Open the DataSphere home page. In the left-hand panel, select Communities.

  2. Select a community with a billing account linked.
  3. Create a project named Node from Docker.
  4. In the project settings, specify:
    • Default folder: data-folder
    • Service account: sa-for-datasphere
  5. Create a secret named key-for-sa to store the full contents of the authorized key file for the sa-for-datasphere service account.
  6. Create a node. To do this, click Create resource in the top-right corner of the project page. In the pop-up window, select Node. Specify the node settings:
    1. Enter grpc as the node name in the Name field.
    2. Under Docker image:
      • Type: Select Docker.
      • Docker image storage: Select Yandex Container Registry.
      • Image path: Specify the path to the Container Registry image in cr.yandex/<registry_ID>/<image_name>:<tag> format. You can get it in the management console by copying the full value on the repository page. You can also fill out this field manually. You can get the registry ID in the CLI by running the yc container registry list command.
      • Password secret: Select key-for-sa.
    3. Under Endpoint:
      • Type: Select gRPC.
      • Port: 9875.
    4. Enable Telemetry and specify:
      • Type: Select Prometheus.
      • HTTP path: /.
      • Port: 9875.
    5. Enable Healthcheck and specify:
      • Type: Select gRPC.
      • Path: echo.v1.Echo.
      • Port: 9875.
      • Timeout: 1.
      • Interval: 15.
      • Fails threshold: 3.
      • Passes threshold: 3.
    6. Under Folder, select data-folder.
    7. Under Provisioning, select the g1.1 configuration.
    8. Click Create.

Run a health check for the service you deployed

  1. Select the project in your community or on the DataSphere home page in the Recent projects tab.

  2. In the list of services, select Node.

  3. Click the grpc node you created.

  4. Navigate to the Request tab.

  5. In the Path field, enter echo.v1.Echo/Reflect.

  6. In the Input values field, enter {"message": "Hello, world!"}.

  7. Run the command you got in the terminal inserting the IAM token value.

    Result:

    {
  "message": "Hello, world!"
}

The client.py script makes a request to the node. To run it and check the service's operation, open the terminal in the folder containing the pulled repository and run the following commands:

  1. Create and activate a virtual Python environment:

    python -m venv venv && source venv/bin/activate

  2. Set the required dependencies:

    pip install -r requirements.txt

  3. Generate the code of your gRPC services from the proto files:

    python -m grpc_tools.protoc -I ./proto --python_out=. --grpc_python_out=. ./proto/echo/v1/echo.proto

  4. Specify environment variables by inserting the required values:

    export NODE_IAM=<IAM_token>
export FOLDER_ID=<folder_ID>
export NODE_ID=<node_ID>

  5. Run the script:

    python client.py

    Result:

    Echo message: Hello, world!

How to delete the resources you created

When deploying and using models, you pay for the uptime of each node instance: from its start to deletion.

If you no longer need the service you deployed, delete the node.

  1. Delete the node.
  2. Delete the secret.
  3. Delete the authorized key of the service account.
  4. Delete the Docker image.
  5. Delete the registry in Container Registry.
Previous
Deploying a service in DataSphere from a Docker image with FastAPI
Next
Image generation using the Stable Diffusion model