Contact UsGet started

Fault-tolerant website with load balancing using Yandex Application Load Balancer

Written by
Updated at December 4, 2024

Create and set up a website with load balancing with Application Load Balancer between three availability zones and fault tolerance in one zone.

  1. Prepare your cloud.
  2. Prepare the network infrastructure.
  3. Create security groups.
  4. Create an instance group.
  5. Upload the website files.
  6. Create a backend group.
  7. Create an HTTP router.
  8. Create an L7 load balancer.
  9. Configure DNS.
  10. Run a fault tolerance test.

If you no longer need the website, delete all its resources.

You can also deploy the infrastructure for hosting a website via Terraform using a ready-made configuration.

Prepare your cloud

Sign up for Yandex Cloud and create a billing account:

  1. Go to the management console and log in to Yandex Cloud or create an account if you do not have one yet.
  2. On the Yandex Cloud Billing page, make sure you have a billing account linked and it has the ACTIVE or TRIAL_ACTIVE status. If you do not have a billing account, create one.

If you have an active billing account, you can go to the cloud page to create or select a folder for your infrastructure to operate in.

Learn more about clouds and folders.

The infrastructure support cost includes:

Prepare the network infrastructure

Before creating a VM:

  1. Go to the Yandex Cloud management console and select the folder where you will perform the operations.
  2. Make sure the selected folder contains a network with subnets in the ru-central1-a, ru-central1-b, and ru-central1-d availability zones. To do this, select Virtual Private Cloud on the folder page. If the subnets or network you need are not listed, create them.

Create security groups

Security groups include rules that allow the load balancer to receive incoming traffic and redirect it to the VMs so they can receive the traffic.

To create security groups for the load balancer and an instance group:

  1. In the management console, select Virtual Private Cloud.

  2. Open the Security groups tab.

  3. Create a security group for the load balancer:

    1. Click Create group.

    2. Name the group, e.g., alb-sg.

    3. Select the network to assign the security group to.

    4. Under Rules, create the following rules using the instructions below the table:

      Traffic
      direction      		 Description Port
      range      		 Protocol Source /
      target type      		 Source /
      target
      Outgoing any All Any CIDR 0.0.0.0/0
      Incoming ext-http 80 TCP CIDR 0.0.0.0/0
      Incoming ext-https 443 TCP CIDR 0.0.0.0/0
      Incoming healthchecks 30080 TCP Load balancer health checks —
      1. Select the Outgoing traffic or Incoming traffic tab.
      2. Click Add rule.
      3. In the Port range field of the window that opens, specify a single port or a range of ports that traffic will come to or from.
      4. In the Protocol field, specify the appropriate protocol or leave Any to allow traffic transmission over any protocol.
      5. In the Purpose or Source field, select the purpose of the rule:
        • CIDR: Rule will apply to the range of IP addresses. In the CIDR blocks field, specify the CIDR and masks of subnets that traffic will come to or from. To add multiple CIDRs, click Add CIDR.
        • Security group: Rule will apply to the VMs from the current group or the selected security group.
        • Load balancer health checks: Rule allowing a load balancer to health check VMs.
      6. Click Save. Repeat the steps to create all the rules from the table.

    5. Click Save.

  4. Similarly, create a security group named alb-vm-sg for an instance group, with the same network and the following rules:

    Traffic
    direction    		 Description Port
    range    		 Protocol Origin type Source
    Incoming balancer 80 TCP Security group alb-sg
    Incoming ssh 22 TCP CIDR 0.0.0.0/0

Create an instance group

Your application backends will be deployed on the VM instance of the target group. The target group will be attached to the load balancer so that requests can be sent to the backend endpoints of your application.

To create an instance group with the minimum configuration:

  1. In the management console, select Compute Cloud.
  2. Open the Instance groups tab and click Create group.
  3. Under Basic parameters:
    • Name the instance group, e.g., alb-vm-group.
    • Select a service account from the list or create a new one. To be able to create, update, and delete VM instances in the instance group, assign the editor role to the service account. By default, all operations with security groups are performed on behalf of the service account.
  4. Under Allocation, select three availability zones (ru-central1-a, ru-central1-b, and ru-central1-d) to ensure fault tolerance of your hosting.
  5. Under Instance template, click Define and set up the configuration for a basic instance:

  • Under Basic parameters, enter the template Description.

  • Under Image/boot disk selection, go to the Cloud Marketplace tab, select the LEMP product, and click Use.

  • Under Disks, specify:

    • Disk type: HDD
    • Size: 3 GB

  • Under Computing resources, specify:

    • Platform: Intel Cascade Lake
    • vCPU: 2
    • Guaranteed vCPU share: 5%
    • RAM: 1 GB

  • Under Network settings:

    • Select a cloud network and its subnets.
    • In the Public address field, select Auto.
    • Select the alb-vm-sg security group.

  • Under Access, specify the information required to access the VM:

    • In the Service account field, select the service account to link the VM to.
    • Enter the username in the Login field.
    • In the SSH key field, paste the contents of the public key file.

    To establish an SSH connection, you need to create a key pair. For more information, see Connecting to a Linux VM via SSH.

  • Click Save.

  1. Under Scaling, enter the Size of the instance group: 3.
  2. Under Integration with Application Load Balancer, select Create target group and specify alb-tg as the group name.
  3. Click Create.

It may take a few minutes to create an instance group. As soon as all VMs change their status to RUNNING, you can upload the website files to them.

See also

Upload the website files

To test the web server, upload the website files to each VM. You can use the index.html file from this archive as an example.

For each VM in the created group, do the following:

  1. On the Virtual machines tab, click the name of the VM in the list. Under Network, find the VM's public IP address.

  2. Connect to the VM via SSH.

  3. Grant your user write permissions for the /var/www/html directory:

    sudo chown -R "$USER":www-data /var/www/html

  4. Upload the website files to the VM via SCP.

    Use the scp command line utility:

    scp -r <path_to_directory_with_files> <VM_user_name>@<VM_IP_address>:/var/www/html

    Use WinSCP to copy the local file directory to /var/www/html on the VM.

Create a backend group

You must link the target group created with the VM group to the backend group that defines traffic allocation settings.

For the backends, groups will implement health checks: the load balancer will periodically send health check requests to the VMs and expect a response after a certain delay.

To create a backend group:

  1. Select Application Load Balancer in the folder where the instance group was created.
  2. Open the Backend groups tab.
  3. Click Create backend group.
  4. Name the backend group, e.g., alb-bg.
  5. Under Backends, click Add.
  6. Name the backend, e.g., backend-1.
  7. In the Target group field, select the previously created alb-tg target group.
  8. Specify the Port the backend VMs will use to receive incoming traffic from the load balancer: 80.
  9. Click Add health check.
  10. Specify the Port the backend VMs will use to accept health check connections: 80.
  11. Specify the Path the load balancer will use for health checks: /.
  12. Click Create.

Create an HTTP router

The backend group should be linked to an HTTP router that defines HTTP routing rules.

To create an HTTP router and add a route to it:

  1. Open the HTTP routers tab.
  2. Click Create HTTP router.
  3. Name the router, e.g., alb-router.
  4. Click Add virtual host.
  5. Name the virtual host, e.g., alb-host.
  6. In the Authority field, specify the website's domain name: alb-example.com.
  7. Click Add route.
  8. Enter a name, e.g., route-1.
  9. In the Backend group field, select the alb-bg group you created earlier.
  10. Leave all other settings unchanged and click Create.

Create an L7 load balancer

To create a load balancer:

  1. Open the Load balancers tab.
  2. Click Create L7 load balancer.
  3. Name the load balancer, e.g., alb-1.
  4. Under Network settings, select the network your instance group is connected to and the previously created security group, alb-sg.
  5. Under Allocation, select the subnets for the load balancer's nodes in each availability zone and enable traffic.
  6. Click Add listener under Listeners.
  7. Name the listener, e.g., alb-listener.
  8. Under Public IP address settings, enable traffic.
  9. Set the port to 80.
  10. In the HTTP router field, select the one you created earlier, alb-router.
  11. Click Create.

Configure DNS

You need to link the domain name you want to use for your website to the load balancer's IP address. You can use Cloud DNS to manage your domain.

The tutorial below describes configuring DNS for the alb-example.com domain name.

Add a zone

  1. Select Cloud DNS in the folder where the instance group was created.
  2. Click Create zone.
  3. Specify the zone settings:
    • Zone: alb-example.com.. Specify your registered domain.
    • Type: Public.
    • Name: alb-zone.
  4. Click Create.

Add resource records

Create DNS records in the public zone:

  1. Select Application Load Balancer. Find the IP address of the previously created alb-1 load balancer in the list of load balancers.
  2. In the Cloud DNS service, select the alb-example.com. zone from the list.
  3. Create an A record:
    1. Click Create record.
    2. Set the record parameters:
      • Name: Leave empty.
      • Record type: Keep A as the value.
      • TTL (record time to live): Keep the default value.
      • Value: Enter the public IP address of the alb-1 load balancer.
    3. Click Create.
  4. Create a CNAME record:
    1. Click Create record.
    2. Set the record parameters:
      • Name: www.
      • Record type: Select CNAME.
      • TTL (record time to live): Keep the default value.
      • Value: Enter alb-example.com.
    3. Click Create.

Run a fault tolerance test

  1. In the management console, select Compute Cloud.

  2. Go to the page of the VM from the previously created group. Under Network, find the VM's public IP address.

  3. Connect to the VM via SSH.

  4. Stop the web service to simulate a failure on the web server:

    sudo service nginx stop

  5. Open your website in the browser. The website should open, even though one of the web servers has failed.

  6. After the check is complete, restart the web service:

    sudo service nginx start

How to delete the resources you created

To shut down the hosting and stop paying for the created resources:

  1. Delete the Application Load Balancer components:
    1. Delete the alb-1 L7 load balancer.
    2. Delete the alb-router HTTP router.
    3. Delete the alb-bg backend group.
  2. Delete the alb-vm-group instance group.

How to create an infrastructure using Terraform

With Terraform, you can quickly create a cloud infrastructure in Yandex Cloud and manage it using configuration files. These files store the infrastructure description written in HashiCorp Configuration Language (HCL). If you change the configuration files, Terraform automatically detects which part of your configuration is already deployed, and what should be added or removed.

Terraform is distributed under the Business Source License. The Yandex Cloud provider for Terraform is distributed under the MPL-2.0 license.

For more information about the provider resources, see the documentation on the Terraform website or mirror website.

To host a fault-tolerant website in a VM group with load balancing with Application Load Balancer using Terraform:

  1. Install Terraform, get the authentication credentials, and specify the source for installing the Yandex Cloud provider (see Configure a provider, step 1).

  2. Prepare files with the infrastructure description:

    1. Clone the repository with configuration files.

      git clone https://github.com/yandex-cloud-examples/yc-website-high-availability-with-alb.git

    2. Go to the directory with the repository. Make sure it contains the following files:

      • application-load-balancer-website.tf: New infrastructure configuration.
      • application-load-balancer-website.auto.tfvars: User data file.
    1. Create a folder for configuration files.
    2. In the folder, create:

      1. application-load-balancer-website.tf configuration file

        application-load-balancer-website.tf
        # Declaring variables for confidential parameters

variable "folder_id" {
  description = "ID of the folder where resources will be created"
  type = string
}

variable "vm_user" {
  type = string
}

variable "ssh_key_path" {
  type      = string
  sensitive = true
}

variable "dns_zone" {
  type      = string
}

variable "domain" {
  type      = string
}

# Adding other variables

locals {
  sa_name      = "ig-sa"
  network_name = "network1"
  subnet_name1 = "subnet-1"
  subnet_name2 = "subnet-2"
  subnet_name3 = "subnet-3"
}

# Configuring a provider 

terraform {
  required_providers {
    yandex = {
      source  = "yandex-cloud/yandex"
      version = ">= 0.47.0"
    }
  }
}

provider "yandex" {
  zone = "ru-central1-a"
}

resource "yandex_iam_service_account" "ig-sa" {
  name = local.sa_name
}

resource "yandex_resourcemanager_folder_iam_member" "editor" {
  folder_id = var.folder_id
  role      = "editor"
  member    = "serviceAccount:${yandex_iam_service_account.ig-sa.id}"
}

resource "yandex_vpc_network" "network-1" {
  name = local.network_name
}

resource "yandex_vpc_subnet" "subnet-1" {
  name           = local.subnet_name1
  zone           = "ru-central1-a"
  network_id     = yandex_vpc_network.network-1.id
  v4_cidr_blocks = ["192.168.1.0/24"]
}

resource "yandex_vpc_subnet" "subnet-2" {
  name           = local.subnet_name2
  zone           = "ru-central1-b"
  network_id     = yandex_vpc_network.network-1.id
  v4_cidr_blocks = ["192.168.2.0/24"]
}

resource "yandex_vpc_subnet" "subnet-3" {
  name           = local.subnet_name3
  zone           = "ru-central1-d"
  network_id     = yandex_vpc_network.network-1.id
  v4_cidr_blocks = ["192.168.3.0/24"]
}

resource "yandex_vpc_security_group" "alb-sg" {
  name        = "alb-sg"
  network_id  = yandex_vpc_network.network-1.id

  egress {
    protocol       = "ANY"
    description    = "any"
    v4_cidr_blocks = ["0.0.0.0/0"]
    from_port      = 1
    to_port        = 65535
  }

  ingress {
    protocol       = "TCP"
    description    = "ext-http"
    v4_cidr_blocks = ["0.0.0.0/0"]
    port           = 80
  }

  ingress {
    protocol       = "TCP"
    description    = "ext-https"
    v4_cidr_blocks = ["0.0.0.0/0"]
    port           = 443
  }

  ingress {
    protocol          = "TCP"
    description       = "healthchecks"
    predefined_target = "loadbalancer_healthchecks"
    port              = 30080
  }
}

resource "yandex_vpc_security_group" "alb-vm-sg" {
  name        = "alb-vm-sg"
  network_id  = yandex_vpc_network.network-1.id

  ingress {
    protocol          = "TCP"
    description       = "balancer"
    security_group_id = yandex_vpc_security_group.alb-sg.id
    port              = 80
  }

  ingress {
    protocol       = "TCP"
    description    = "ssh"
    v4_cidr_blocks = ["0.0.0.0/0"]
    port           = 22
  }
}

resource "yandex_compute_image" "lemp" {
  source_family = "lemp"
}

resource "yandex_compute_instance_group" "alb-vm-group" {
  name               = "alb-vm-group"
  folder_id          = var.folder_id
  service_account_id = yandex_iam_service_account.ig-sa.id
  instance_template {
    platform_id        = "standard-v2"
    service_account_id = yandex_iam_service_account.ig-sa.id
    resources {
      core_fraction = 5
      memory        = 1
      cores         = 2
    }

    boot_disk {
      mode = "READ_WRITE"
      initialize_params {
        image_id = yandex_compute_image.lemp.id
        type     = "network-hdd"
        size     = 3
      }
    }

    network_interface {
      network_id         = yandex_vpc_network.network-1.id
      subnet_ids         = [yandex_vpc_subnet.subnet-1.id,yandex_vpc_subnet.subnet-2.id,yandex_vpc_subnet.subnet-3.id]
      nat                = true
      security_group_ids = [yandex_vpc_security_group.alb-vm-sg.id]
    }

    metadata = {
      user-data = "#cloud-config\nusers:\n  - name: ${var.vm_user}\n    groups: sudo\n    shell: /bin/bash\n    sudo: ['ALL=(ALL) NOPASSWD:ALL']\n    ssh_authorized_keys:\n      - ${file("${var.ssh_key_path}")}"
    }
  }

  scale_policy {
    fixed_scale {
      size = 3
    }
  }

  allocation_policy {
    zones = ["ru-central1-a", "ru-central1-b", "ru-central1-d"]
  }

  deploy_policy {
    max_unavailable = 1
    max_expansion   = 0
  }

  application_load_balancer {
    target_group_name = "alb-tg"
  }
}

resource "yandex_alb_backend_group" "alb-bg" {
  name                     = "alb-bg"

  http_backend {
    name                   = "backend-1"
    port                   = 80
    target_group_ids       = [yandex_compute_instance_group.alb-vm-group.application_load_balancer.0.target_group_id]
    healthcheck {
      timeout              = "10s"
      interval             = "2s"
      healthcheck_port     = 80
      http_healthcheck {
        path               = "/"
      }
    }
  }
}

resource "yandex_alb_http_router" "alb-router" {
  name   = "alb-router"
}

resource "yandex_alb_virtual_host" "alb-host" {
  name           = "alb-host"
  http_router_id = yandex_alb_http_router.alb-router.id
  authority      = [var.domain, "www.${var.domain}"]
  route {
    name = "route-1"
    http_route {
      http_route_action {
        backend_group_id = yandex_alb_backend_group.alb-bg.id
      }
    }
  }
}

resource "yandex_alb_load_balancer" "alb-1" {
  name               = "alb-1"
  network_id         = yandex_vpc_network.network-1.id
  security_group_ids = [yandex_vpc_security_group.alb-sg.id]

  allocation_policy {
    location {
      zone_id   = "ru-central1-a"
      subnet_id = yandex_vpc_subnet.subnet-1.id
    }

    location {
      zone_id   = "ru-central1-b"
      subnet_id = yandex_vpc_subnet.subnet-2.id
    }

    location {
      zone_id   = "ru-central1-d"
      subnet_id = yandex_vpc_subnet.subnet-3.id
    }
  }

  listener {
    name = "alb-listener"
    endpoint {
      address {
        external_ipv4_address {
        }
      }
      ports = [ 80 ]
    }
    http {
      handler {
        http_router_id = yandex_alb_http_router.alb-router.id
      }
    }
  }
}

resource "yandex_dns_zone" "alb-zone" {
  name        = "alb-zone"
  description = "Public zone"
  zone        = "${var.domain}."
  public      = true
}

resource "yandex_dns_recordset" "rs-1" {
  zone_id = yandex_dns_zone.alb-zone.id
  name    = "${var.domain}."
  ttl     = 600
  type    = "A"
  data    = [yandex_alb_load_balancer.alb-1.listener[0].endpoint[0].address[0].external_ipv4_address[0].address]
}

resource "yandex_dns_recordset" "rs-2" {
  zone_id = yandex_dns_zone.alb-zone.id
  name    = "www"
  ttl     = 600
  type    = "CNAME"
  data    = [ var.domain ]
}

      2. application-load-balancer-website.auto.tfvars user data file:

        application-load-balancer-website.auto.tfvars
        folder_id    = "<folder_ID>"
vm_user      = "<VM_user_name>"
ssh_key_path = "<path_to_public_SSH_key>"
domain       = "<domain>"

    For more information about the parameters of resources used in Terraform, see the provider documentation:

  3. In the application-load-balancer-website.auto.tfvars file, set the following user-defined parameters:

    • folder_id: Folder ID.
    • vm_user: VM username.
    • ssh_key_path: Path to the file with a public SSH key to authenticate the user on the VM. For more information, see Creating an SSH key pair.
    • domain: Domain name, e.g., alb-example.com.

  4. Create resources:

    1. In the terminal, change to the folder where you edited the configuration file.

    2. Make sure the configuration file is correct using the command:

      terraform validate

      If the configuration is correct, the following message is returned:

      Success! The configuration is valid.

    3. Run the command:

      terraform plan

      The terminal will display a list of resources with parameters. No changes are made at this step. If the configuration contains errors, Terraform will point them out.

    4. Apply the configuration changes:

      terraform apply

    5. Confirm the changes: type yes in the terminal and press Enter.

  5. Upload the website files.

  6. Run a fault tolerance test.

Previous
Configuring logging for an Application Load Balancer L7 load balancer using an Ingress controller
Next
Health checking your apps in a Managed Service for Kubernetes cluster using an Application Load Balancer L7 load balancer