Contact UsGet started

Create an instance group from a Container Optimized Image in Compute Cloud

Written by
Updated at July 8, 2024

To run multiple instances of the service in Docker containers, you can create an instance group from a Container Optimized Image. In such groups, you can update Docker containers with VM metadata using the COI or Docker Compose specification.

Alert

When creating instance groups, keep the limits in mind. Not to disrupt the component Instance Groups, do not update or delete manually created resources: target group Network Load Balancer, VMs, and disks. Instead of this, change or delete the entire group.

By default, all operations in Instance Groups are performed on behalf of a service account. If you don't have a service account, create one.

To create an instance group based on a Container Optimized Image:

  1. If you do not have the Yandex Cloud command line interface yet, install and initialize it.

  2. The folder specified in the CLI profile is used by default. You can specify a different folder using the --folder-name or --folder-id parameter.

  3. View a description of the CLI command to create an instance group:

    yc compute instance-group create --help

  4. Check whether the folder contains any networks:

    yc vpc network list

    If there are not any, create one.

  5. Create a YAML file and name it, e.g., specification.yaml.

  6. Find out the ID of the latest version of the public Container Optimized Image.

    A Container Optimized Image in a Container Registry registry may be updated and changed with new releases. This will not automatically update the VM image to the latest version. To create an instance group with the latest Container Optimized Image version, you need to check whether it is available yourself:

    yc compute image get-latest-from-family container-optimized-image --folder-id standard-images

    Result:

    id: <ID_of_latest_COI_version>
folder_id: standard-images
...
    1. Go to the Cloud Marketplace page and select the image with the configuration you need:
    2. Under Product IDs, copy the value of image_id.

  7. In the specification.yaml file you created, specify the following:

    • General information about the group:

      name: container-optimized-group
service_account_id: aje3932acd8a********
description: "This instance group was created from YAML config."

      Where:

      • name: Name of the instance group. The name must be unique within the folder. The name may contain lowercase Latin letters, numbers, and hyphens. The first character must be a letter. The last character cannot be a hyphen. The name may be up to 63 characters long.

      • service_account_id: Service account ID.

        You cannot delete a service account while it is linked to an instance group.

      • description: Description of the instance group.

    • Instance template:

      instance_template:
  platform_id: standard-v3
  resources_spec:
    memory: 2G
    cores: 2
  boot_disk_spec:
    mode: READ_WRITE
    disk_spec:
      image_id: <latest_COI_version_ID>
      type_id: network-hdd
      size: 32G
  network_interface_specs:
    - network_id: c64mknqgnd8a********
      primary_v4_address_spec: {}
      security_group_ids:
        - enps0ar5s3ti********
  placement_policy:
   placement_group_id: rmppvhrgm77g********
  metadata:
    docker-container-declaration: |-
      spec:
        containers:
          - name: nginx
            image: cr.yandex/mirror/nginx:1.17.4-alpine
            securityContext:
              privileged: false
            tty: false
            stdin: false

      By default, the disk size is specified in bytes. You can specify a different unit of measurement using the applicable suffix.

      Suffix Prefix and multiplier Example
      k kilo- (210) 640k = 640 × 210 = 655360
      m mega- (220) 48m = 48 × 220 = 50331648
      g giga- (230) 10g = 10 × 230 = 10737418240
      t tera- (240) 4t = 4 × 240 = 4398046511104
      p peta- (250) 2p = 2 × 250 = 2251799813685248

      Where:

      • platform_id: Platform ID.
      • memory: Amount of RAM.
      • cores: Number of processor cores (vCPUs).
      • mode: Disk access mode.
        • READ_ONLY: Read-only access.
        • READ_WRITE: Read/write access.
      • image_id: ID of the public Container Optimized Image.
      • type_id: Disk type.
      • size: Disk size. It must be at least 30 GB.
      • network_id: ID of the default-net network.
      • primary_v4_address_spec: IPv4 specification. Only IPv4 is currently available. You can allow public access to group instances by specifying the IP version for the public IP address.
      • security_group_ids: List of security group IDs.
      • metadata: Values to send to the VM metadata.
      • docker-container-declaration: Key in the VM metadata that is used with the COI specification of the Docker container. In the metadata, you can use the Docker Compose specification. To do this, specify the docker-compose key instead of the docker-container-declaration key.
      • placement_policy: (Optional) VM placement group parameters:
        • placement_group_id: Placement group ID.

    • Policies:

      deploy_policy:
  max_unavailable: 1
  max_expansion: 0
scale_policy:
  fixed_scale:
    size: 3
allocation_policy:
  zones:
    - zone_id: ru-central1-a
      instance_tags_pool:
      - first
      - second
      - third

      Where:

      • deploy_policy: Deployment policy for instances in the group.
      • scale_policy: Scaling policy for instances in the group.
      • allocation_policy: Policy for allocating VM instances by availability zones.

      Full code for the specification.yaml file:

      name: container-optimized-group
service_account_id: aje3932acd8a********
description: "This instance group was created from YAML config."
instance_template:
  service_account_id: aje3932acd8a******** # ID of the service account to access private Docker images.
  platform_id: standard-v3
  resources_spec:
    memory: 2G
    cores: 2
  boot_disk_spec:
    mode: READ_WRITE
    disk_spec:
      image_id: <latest_COI_version_ID>
      type_id: network-hdd
      size: 32G
  network_interface_specs:
    - network_id: c64mknqgnd8a********
      primary_v4_address_spec: {}
      security_group_ids:
        - enps0ar5s3ti********
  placement_policy:
    placement_group_id: rmppvhrgm77g********
  metadata:
    docker-container-declaration: |-
      spec:
        containers:
          - name: nginx
            image: cr.yandex/mirror/nginx:1.17.4-alpine
            securityContext:
              privileged: false
            tty: false
            stdin: false
deploy_policy:
  max_unavailable: 1
  max_expansion: 0
scale_policy:
  fixed_scale:
    size: 3
allocation_policy:
  zones:
     - zone_id: ru-central1-a
       instance_tags_pool:
       - first
       - second
       - third

      Note

      To use the Docker Compose specification in specification.yaml, specify the docker-compose key instead of the docker-container-declaration key.

  8. Create an instance group in the default folder:

    yc compute instance-group create --file specification.yaml

    This command creates a group of three similar instances with the following characteristics:

    • Name: container-optimized-group.
    • From the latest version of the public Container Optimized Image.
    • With a running Docker container based on cr.yandex/mirror/nginx:1.17.4-alpine.
    • Network: default-net.
    • Availability zone: ru-central1-a.
    • vCPUs: 2; RAM: 2 GB.
    • Network HDD: 32 GB.
Previous
Creating an autoscaling instance group
Next
Creating an instance group based on the YAML specification