Creating a partner trunk and a private connection in it
The process of enabling the Yandex Cloud Interconnect service can be logically divided into the following stages:
Creating a new partner trunk
Getting started
- See the documentation to learn how the service works.
- Contact your Yandex Cloud manager to agree upon the pricing plan (connection capacity).
- Select a partner from the list, and make sure they can set up a trunk at the proper point of presence and with the required capacity.
Warning
To ensure fault tolerance, we recommend setting up trunks (via a partner or directly) at two points of presence.
- If a Yandex Cloud solution architect is working with you, discuss and agree on a Yandex Cloud Interconnect service setup diagram.
Contacting tech support to set up a new partner trunk
Create a new support request
Warning
In the request below, the attribute values for the partner trunk are provided as an example. Each customer should have their own attribute values.
Write a support request as follows:
Subject: [CIC] Creating a new partner trunk.
Request text:
Requesting a new Cloud Interconnect partner trunk
with the following parameters:
client: My Business LLC
folder-id: b1g28j9359gic3p2gca2
partner: RETN
point of presence: M9
connection capacity: 250mbps
Where:
client
: Company name.folder-id
: ID of the folder to send Cloud Interconnect monitoring metrics to.partner
: Name of the partner from the partner list.Point of presence
: Code of the point of presence from the partner list, where the partner provides connections to Yandex Cloud.Connection capacity
: Bandwidth in Mbps.
Tech support team's response to the customer's request
Once you complete all the actions required to set up a partner trunk, the support team provides to the customer:
- ID of the created trunk:
trunk_id
- Service key for the created trunk:
service_key
Here is an example of a support response to a request to create a partner trunk (for reference purposes):
trunk_id: euus5dfgchu23b81d472
service_key: euuq3f6g1zk8dbrhw4da
After a partner trunk is created, the support team provides its parameters to the partner. Here is the list of parameters:
partner_joint_id
, partner_vlan_id
, bandwidth_mbps
, and service_key
.
Customer's request to the partner to set up a new partner trunk
After receiving a response from Yandex Cloud support, the customer requests the partner to activate (configure) the partner trunk. The request must include the service_key
you obtained at the previous step.
The customer waits for the partner to confirm the fulfillment of the request and cooperates with the partner to set up a connection from the partner's equipment to the customer's equipment.
The communication channel between the customer and partner will be such as agreed between them, e.g., by email.
Note
Monitoring metrics are not provided for partner trunks currently.
For private or public connections, full-scale monitoring metrics are provided.
Setting up a private connection
To set up a new private connection in an existing trunk, create a new support request
Contacting support to set up a new private connection
Warning
All private connection attribute values in the support request text below are provided for indicative purposes only. Each customer should have their own attribute values.
Write a support request as follows:
Subject: [CIC] Add a new private connection to an existing trunk.
Request text:
Please add a new private connection to an existing trunk.
Connection parameters:
trunk_id: euus5dfgchu23b81d472
vlan_id: 101
ipv4_peering:
peering_subnet: 192.168.10.0/30
peer_ip: 192.168.10.1
cloud_ip: 192.168.10.2
peer_bgp_asn: 65001
#cloud_bgp_asn: 200350
vpc:
vpc_net_id: enpdffqsg8r221d7vjq5
vpc_subnets:
ru-central1-a: [10.60.192.0/21]
ru-central1-b: [10.60.200.0/21, 10.60.220.0/24]
ru-central1-d: [10.60.208.0/20]
Where:
trunk_id
: Trunk ID received from the support team at the previous step.- vlan_id
VLAN-ID
for the private connection in trunk 802.1Q. This value is selected by the customer. It must be different from theVLAN-ID
values of the private connections previously set up in this trunk. peering_subnet
: Point-to-point subnet for BGP peering, This value is selected by the customer.peer_ip
: IP address of the point-to-point (peering) subnet on the customer's equipment. This value is selected by the customer.cloud_ip
: IP address of the point-to-point (peering) subnet on the Yandex Cloud equipment. This value is selected by the customer.peer_bgp_asn
: BGP ASN on the customer's equipment in ASPlain format. This value is selected by the customer.vpc_net_id
: ID of the Yandex Virtual Private Cloud network for a private connection.vpc_subnets
: List of IPv4 subnet prefixes grouped by Yandex Cloud availability zones. The resources in these subnets will only be accessible via this private connection. These prefixes will be announced over BGP by the Yandex Cloud equipment in the direction towards the customer's equipment.folder_id
(optional): By default, private connection monitoring metrics will be saved to the folder specified when creating a trunk. If required, you can explicitly specify the folder to save private connection monitoring metrics to.
Support team's response to the customer's request
Once you complete all required actions for setting up a private connection, the support team will provide the customer with the ID of the created private connection.
Here is how the support team may respond to the request for creating a private connection (this sample is provided for indicative purposes only):
id: cf3qdug4fsf737g2gpdu
where id
is the ID of the created private connection.
Monitoring the status of a private connection
- Use the monitoring service to monitor, on your own, when the private connection BGP session on the Yandex Cloud equipment switches to the running status.
- The support team will notify you once they finish configuring BGP announcements for the subnet prefixes you requested. It may take up to two business days to configure BGP announcements.
- You should check the IP connectivity between your equipment and the cloud resources to be accessible through the configured private connection yourself and notify the support team of the check results.
- If there are any IP connectivity issues, contact support so that they may run diagnostics and troubleshooting.