Delivering data to Yandex Managed Service for Apache Kafka® using Yandex Data Transfer

You can track data changes in a Managed Service for MySQL® source cluster and send them to a Managed Service for Apache Kafka® target cluster using Change Data Capture (CDC).

To set up CDC using Data Transfer:

1. Prepare the source cluster.
2. Prepare the target cluster.
3. Prepare and activate the transfer.
4. Test the transfer.

If you no longer need the resources you created, delete them.

Getting startedGetting started

1. Create a Managed Service for MySQL® source cluster in any suitable configuration with the following settings:

   • Database: db1
   • Username: my-user
   • Hosts: Publicly available

2. Create a Managed Service for Apache Kafka® target cluster in any suitable configuration with publicly available hosts.

3. If you are using security groups, configure them to enable connecting to the clusters from the internet:

   • Guide for Managed Service for MySQL®
   • Guide for Managed Service for Apache Kafka®

4. Install the kcat (kafkacat) utility and the MySQL command-line tool on the local machine. For example, in Ubuntu 20.04, run:

   sudo apt update && sudo apt install kafkacat mysql-client --yes
   

Prepare the source clusterPrepare the source cluster

1. For Data Transfer to get notifications about data updates from a Managed Service for MySQL® cluster, you need to configure external replication in the source cluster. To enable my-user to perform replication, assign the user the role ALL_PRIVILEGES for the db1 database and grant the global privileges REPLICATION CLIENT and REPLICATION SLAVE.

2. Connect to the database db1 on behalf of my-user.

3. Add test data to the database. As an example, we will use a simple table with information transmitted by car sensors.

   Create a table:

   CREATE TABLE db1.measurements (
       device_id varchar(200) NOT NULL,
       datetime timestamp NOT NULL,
       latitude real NOT NULL,
       longitude real NOT NULL,
       altitude real NOT NULL,
       speed real NOT NULL,
       battery_voltage real,
       cabin_temperature real NOT NULL,
       fuel_level real,
       PRIMARY KEY (device_id)
   );
   

   Populate the table with data:

   INSERT INTO db1.measurements VALUES
       ('iv9a94th6rzt********', '2022-06-05 17:27:00', 55.70329032, 37.65472196,  427.5,    0, 23.5, 17, NULL),
       ('rhibbh3y08qm********', '2022-06-06 09:49:54', 55.71294467, 37.66542005, 429.13, 55.5, NULL, 18, 32);
   

Prepare the target clusterPrepare the target cluster

The settings vary depending on the topic management method used. Data topic names are generated using the following convention: <topic_prefix>.<schema_name>.<table_name>. In this tutorial, the cdc prefix is used as an example.

Prepare and activate the transferPrepare and activate the transfer

1. Create an endpoint for the MySQL® source with the following settings:

   • Database type: MySQL.
   • Endpoint parameters:
     • Connection settings: Managed Service for MySQL cluster.
     • Managed Service for MySQL cluster: Select the created Managed Service for MySQL® cluster.
     • Database: db1.
     • User: my-user.
     • Password: Specify the password for my-user.
     • Included tables: db1.measurements.

2. Create an endpoint for the Apache Kafka® target with the following settings:

   • Database type: Kafka.

   • Endpoint parameters:

     • Connection type: Managed Service for Apache Kafka cluster.

       • Managed Service for Apache Kafka cluster: Select the created Managed Service for Apache Kafka® cluster.
       • Authentication: Enter the details of the created kafka-user user.

     • Topic: Topic full name.

     • Topic full name: cdc.db1.measurements.

     If you need to track changes in multiple tables, fill out the fields as follows:

     • Topic: Topic prefix.
     • Topic prefix: Enter the cdc prefix you used to generate topic names.

3. Create a transfer of the Replication type with the created source and target endpoints.

4. Activate the transfer and wait for its status to change to Replicating.

Test the transferTest the transfer

1. In a separate terminal, run the kafkacat utility in consumer mode:

   kafkacat \
       -C \
       -b <FQDN_of_broker_host_1>:9091,...,<FQDN_of_broker_host_N>:9091 \
       -t cdc.db1.measurements \
       -X security.protocol=SASL_SSL \
       -X sasl.mechanisms=SCRAM-SHA-512 \
       -X sasl.username=kafka-user \
       -X sasl.password=<password> \
       -X ssl.ca.location=/usr/local/share/ca-certificates/Yandex/YandexInternalRootCA.crt \
       -Z \
       -K:
   

   You can obtain the FQDNs of broker hosts with a list of hosts in the Managed Service for Apache Kafka® cluster.

2. Connect to the source cluster and add data to the measurements table:

   INSERT INTO db1.measurements VALUES
       ('iv7b74th678t********', '2022-06-08 17:45:00', 53.70987913, 36.62549834, 378.0, 20.5, 5.3, 20, NULL),
       ('iv9a94th678t********', '2022-06-07 15:00:10', 55.70985913, 37.62141918,  417.0, 15.7, 10.3, 17, NULL);
   

3. Make sure the terminal running the kafkacat utility is displaying the db1.measurements table data format schema and information on the inserted rows.

   Example of the message fragment

   {
       "payload": {
           "device_id": "iv7b74th678t********"
       },
       "schema": {
           "fields": [
               {
                   "field": "device_id",
                   "optional": false,
                   "type": "string"
               }
           ],
           "name": "cdc.db1.measurements.Key",
           "optional": false,
           "type": "struct"
       }
   }: {
       "payload": {
           "after": {
               "altitude": 378,
               "battery_voltage": 5.3,
               "cabin_temperature": 20,
               "datetime": "2020-06-08T17:45:00Z",
               "device_id": "iv7b74th678t********",
               "fuel_level": null,
               "latitude": 53.70987913,
               "longitude": 36.62549834,
               "speed": 20.5
           },
           "before": null,
           "op": "c",
           "source": {
               "connector": "mysql",
               "db": "db1",
               "file": "mysql-log.000016",
               "gtid": "1e46a80b-2e96-11ed-adf7-d00d183780**:*-*****",
               "name": "cdc",
               "pos": 1547357,
               "query": null,
               "row": 0,
               "server_id": 0,
               "snapshot": "false",
               "table": "measurements",
               "thread": null,
               "ts_ms": 1662632515000,
               "version": "1.1.2.Final"
           },
           "transaction": null,
           "ts_ms": 1662632515000
       },
       "schema": {
           "fields": [
               {
                   "field": "before",
                   "fields": [
                       {
                           "field": "device_id",
                           "optional": false,
                           "type": "string"
                       },
                       ...
                   ],
                   "name": "cdc.db1.measurements.Value",
                   "optional": true,
                   "type": "struct"
               },
               {
                   "field": "after",
                   "fields": [
                       ...
                   ],
                   "name": "cdc.db1.measurements.Value",
                   "optional": true,
                   "type": "struct"
               },
               {
                   "field": "source",
                   "fields": [
                       {
                           "field": "version",
                           "optional": false,
                           "type": "string"
                       },
                       ...
                   ],
                   "name": "io.debezium.connector.mysql.Source",
                   "optional": false,
                   "type": "struct"
               },
               {
                   "field": "op",
                   "optional": false,
                   "type": "string"
               },
               ...
           ],
           "name": "cdc.db1.measurements.Envelope",
           "optional": false,
           "type": "struct"
       }
   }
   

Specifics of data delivery with Data TransferSpecifics of data delivery with Data Transfer

• Transferring data from MySQL® to Apache Kafka® modifies some data types:

  • tinyint(1) transfers as boolean.
  • real transfers as double.
  • bigint unsigned transfers as int64.

• Under payload.source source metadata, omit the server_id and thread parameters.

Delete the resources you createdDelete the resources you created

Some resources are not free of charge. To avoid paying for them, delete the resources you no longer need:

1. Deactivate and delete the transfer.

2. Delete the endpoints.

3. Delete the clusters:

   • Managed Service for Apache Kafka®​
   • Managed Service for MySQL®​

4. If static public IP addresses were used for accessing the cluster hosts, release and delete them.